<%@LANGUAGE="JAVASCRIPT" CODEPAGE="1252"%>
Zone Power Distribution - Spider Manufacturing Inc. Kelowna, B.C. CA (250) 765-2616
"Leading Technology and Customer Flexibility for 2000 and Beyond"
The power distribution box is the center point of the zone distribution grid. Models are currently available in heights as low as 1-3/4". This is the conversion point between hard wiring done by the on site electrical contractor and the premanufactured wiring system. Optimal efficiency is typically obtained by placing the power distribution box on a 20' grid. Of course this only a starting point, as the boxes can placed to accommodate any situation. Circuit capacity ranges from four to sixteen circuits using a shared neutral - eight wire system or from three to twelve circuits using an independent neutral - eight wire system. Circuit density will depend upon individual needs as determined by the electrical engineer.
The Splitter is the component used to distribute the power to more than one location without running cables back to the power distribution box. This allows the potential to power up more than one wall panel, furniture feed or floor box from a single feed to the power distribution box. The splitter is available in both shared neutral 4/2/2 and independent neutral 3/3/2 configurations.
The Extender Cable is the link between the power distribution box, the Splitter and moveable wall feeds, floor boxes, and/or single and dual cells. As with all other products, the extenders are available in both 4/2/2 shared neutral and 3/3/2 independent neutral configurations. The gender on the extenders is typically female to female to male however, male to male and male to female versions are available.
The Splitter is the component used to distribute the power to more than one location without running cables back to the power distribution box. This allows the potential to power up more than one wall panel, furniture feed or floor box from a single feed to the power distribution box. The splitter is available in both shared neutral 4/2/2 and independent neutral 3/3/2 configurations.
The Extender Cable is the link between the power distribution box, the Splitter and moveable wall feeds, floor boxes, and/or single and dual cells. As with all other products, the extenders are available in both 4/2/2 shared neutral and 3/3/2 independent neutral configurations. The gender on the extenders is typically female to female to male however, male to male and male to female versions are available.